Removing
(
Refitting
)
|
|
Removing
(
Refitting
)
|
|
  |
1. Adjust the retaining clip and remove the waste gate solenoid valve from the fan support. |
  |
1. Disonnect the electrical connection for the waste gate solenoid valve.
|
  |
1. Loosen the bands and remove the pressurized air recirculation pipe for the waste gate solenoid valve. |
|
|
Refitting
(
Removing
)
- Place the waste gate solenoid valve pressurized air recirculation pipe in position and tighten the bands. - Connect the electrical connection for the waste gate solenoid valve. - Place the waste gate solenoid valve in position and check that the retaining clip is inserted in the fan support. |
|