1. Adjust the retaining clip and remove the waste gate solenoid valve from the fan support.
|
|
1. Adjust the retaining clip and remove the waste gate solenoid valve from the fan support. |
  |
1. Disonnect the electrical connection for the waste gate solenoid valve.
|
  |
1. Loosen the band for the pressurized air supply pipe to the waste gate solenoid valve, waste gate solenoid valve side. |
  |
1. Loosen the band and remove the pressurized air supply pipe to the waste gate solenoid valve. |
|
|
 Refitting
(
Removing
)
- Place the waste gate valve pressurized air supply pipe in position and tighten the bands. - Connect the electrical connection for the waste gate solenoid valve. - Place the waste gate solenoid valve in position and check that the retaining clip is inserted in the fan support. |
|