Removing
(
Refitting
)
- Remove the rear cover on the tunnel complete with handbrake lever boot, with reference to
|
|
Removing
(
Refitting
)
- Remove the rear cover on the tunnel complete with handbrake lever boot, with reference to |
|
  |
1. Loosen the handbrake cables adjustment nut. 2. Disconnect the cables from the keeper. |
  |
1. Disconnect the electrical connection for the handbrake switch.
|
  |
1. Undo the bolts (1a) and remove the handbrake lever (1b). |
  |
Refitting
(
Removing
)
1. Place the handbrake lever (1a) in its housing and tighten the bolts (1b) to the recommended torque.
|
|
|
- Connect the electrical connection for the handbrake switch. - Connect the cables to the keeper. |
|
|
|
|
|
- Place the rear cover on the tunnel complete with handbrake lever boot in position, with reference to |
|