|
Removing
(
Refitting
)
- Position the vehicle on the lift. |
|
![]() |
![]() |
![]() |
![]() |
Op. 1056B65 SOUND INSULATING COVER FOR INJECTOR ASSEMBLY - R.R. |
![]() |
![]() |
![]() |
![]() |
Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. |
![]() |
![]() |
Op. 1032D26 FRONT TIMING PROTECTIVE COVER (UPPER PART) - R.R. |
![]() |
Op. 1032D27 FRONT TIMING PROTECTIVE COVER (LOWER PART) - R.R. |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
- Undo the lower connector and the screw of the coolant delivery line intermediate bracket to the engine oil heat exchanger, with reference to Op. 1088D55 COOLANT SUPPLY PIPE TO ENGINE OIL HEAT EXCHANGER - R.R. |
![]() |
![]() |
- Undo the lower connector for the engine oil delivery line to the turbocharger, with reference to Op. 1084B40 ENGINE OIL DELIVERY PIPE TO TURBOCHARGER - R + R |
![]() |
Op. 1084B36 ENGINE OIL FILTER MOUNTING AND HEAT EXCHANGER - R.R |
![]() |
Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE |
![]() |
Op. 1008A46 POWERTRAIN ASSEMBLY RIGID MOUNT - TIMING SIDE - R.R. |
![]() |
Op. 1032B10 TOOTHED TIMING BELT - R.R. FOR TIMING OR REPLACEMENT |
![]() |
|
- Temporary fit the power unit mounting rigid mount and flexible mounting, timing side and remove the arm lift used to remove the timing belt. - Raise the vehicle and remove the engine oil sump, refer to Op. 1020A20 CRANKCASE SUMP- R.R. CLEAN SEALING SURFACES AND APPLY SEALANT |
![]() |