FUNCTIONAL DESCRIPTION

The Body Computer M001 - pin 14 of connector B - supplies the controls on the driver's door H051 - pin 16 and H050 pin 2 for the passenger side in accordance with the logic described above: this power supply also lights up the LEDs and supplies the controls.

An ignition-controlled power supply operated by pin 3 of connector B of M001 is sent to the electronics inside motors N060 and N061, whilst the power supply is sent, via the line protected by fuses F47 and F48 of M001, from pins 19 and 18 of connector C of M001.

The Body Computer M001 - connector A - receives a direct powr supply from the battery through the line protected by maxi fuse F01 of the engine compartment junction unit B001.

The Body Computer M001 receives an ignition-controlled (INT) power supply at pin 11 of connector E, whilst the ignition-controlled (INT/A) signal reaches pin 1 of connector E.

Pin 9 of connector E of M001 provides the Body Computer with a reference earth.

The control unit H051 manages the operation of the driver's electric window and sends commands, from pins 2 and 3, directly to the motor N060.

The commands for the passenger side window, incorporated in unit H051, are resent, from pins 4 and 5, to control unit H050 and from there directly to the motor N061.

The short drop function is activated by a door opening signal coming from the locks N050 and N051 to pin 4 of N060 and N061.