FUNCTIONAL DESCRIPTION

The boot opening/closing function is controlled by the Body Computer M001.

The Body Computer M001 - connector A - receives a direct powr supply from the battery through the line protected by maxi fuse F01 of the engine compartment junction unit B001.

The Body Computer M001 receives an ignition-controlled (INT) power supply at pin 11 of connector E, whilst pin 9 of connector E of M001 provides the Body Computer with a reference earth.

Body Computer M001 receives the following inputs:

- the lock/release signals from the aerial-receiver of remote control P093, which are connected to pins 31 and 46 of connector F of M001;

- the boot locking signal from the switch in the handle I033, at pin 38 of connector F of M001.

According to the logic illustrated, the Body Computer M001 controls the geared motor for lock N057 via the line - from pin 30 of connector C - supplied by fuse F38 of the Body Computer M001.

The boot open signal is sent by the lock N057 to pin 39 of connector F of M001.

Body Computer M001 is connected via the CAN line to instrument panel E050, to which it sends a signal that turns on the doors open warning light, where necessary, with the boot open signal and activates the buzzer.