145 - MiTo   1.4 16v TJet   COURTESY (PUDDLE) LIGHTS - FUNCTIONAL DESCRIPTION   E2521   
COURTESY (PUDDLE) LIGHTS - DESCRIPTION COURTESY (PUDDLE) LIGHTS - FUNCTIONAL DESCRIPTION COURTESY (PUDDLE) LIGHTS - WIRING DIAGRAM COURTESY (PUDDLE) LIGHTS - COMPONENT LOCATION Print electrical function

FUNCTIONAL DESCRIPTION

The Body Computer M001 receives "door open" input signals at pins 54 (driver's door) and 53 (passenger side door) of connector B of M001.

The two (puddle) courtesy lights G051 and G052 are supplied, according to the logic described previously, by the line protected by fuse F032 located in the Body Computer M1.

The Body Computer M001 - connector A - receives a direct powr supply from the battery through the line protected by maxi fuse F01 of the engine compartment junction unit B001.

The Body Computer M001 receives an ignition-controlled power supply (INT) at pin 11 of connector E.

Pin 9 of connector E of M001 provides the Body Computer with a reference earth.

Body Computer M001 is connected via the CAN line to instrument panel E050, to which it sends a signal that turns on the door open warning light, where necessary, and activates the buzzer to give an acoustic signal.

Lights G051 and G052 are supplied by the Body Computer M1, from pin 20 of connector C, whilst the timed analogue signal arrives from pin 7 of connector B.