Removing
(
Refitting
)
- Open the sliding roof blind.
- Open the sliding roof to the end of travel.
- Work on both sides.
Op. 7040H38 CENTRE PILLAR UPPER ELEMENT (ONE), LEFT OR RIGHT - R.R
|
|
Removing
(
Refitting
)
- Open the sliding roof blind. - Open the sliding roof to the end of travel. - Work on both sides. Op. 7040H38 CENTRE PILLAR UPPER ELEMENT (ONE), LEFT OR RIGHT - R.R |
|
|
|
|
|
- Remove all the handles. Op. 7065C28 GRAB HANDLE ON ROOF LINING (ONE), LH OR RH - R.R. |
|
|
  |
1. Prise up the front door housing seals in the area of the roof lining. |
  |
1. Slightly lower the front part of the roof lining. 2. Undo the screws (2a) and remove the blind engagement trim (2b). |
|
|
Refitting
(
Removing
)
- Check that the blind engagement trim is not damaged. - Place the blind engagement trim in position. - Screw in the bolts. - Position the roof lining and fit the front door housing seals. |
|
Op. 7065C28 GRAB HANDLE ON ROOF LINING (ONE), LH OR RH - R.R. |
|
|
|
|
|
Op. 7040H38 CENTRE PILLAR UPPER ELEMENT (ONE), LEFT OR RIGHT - R.R |
|
- Close the sliding roof to the end of travel. - Close the sliding roof blind. |