145 - MiTo   1.4 16v TJet   CENTRE REAR SEAT BELT ANCHORAGE MECHANISM LINK - R.R.   7065B24   

Detail     Detail
Removing ( Refitting )

- Lift up the rear seat cushions.

   Op. 7040H59 ODDMENTS COMPARTMENT ON REAR SIDE PANEL (ONE), LEFT OR RIGHT - R.R.


Enlarge the image

1. Undo the centre mounting rod (1b) bolt (1a).

2. Lift up the edge (2a) of the sound insulation.

3. Lift the edge (3a) of the carpet.

Enlarge the image

1. Disconnect the retainers (1a) for the anchorage link wiring (1b).

2. Detach the electrical connection from the anchorage link.

 

 

Description

  

Connector
 

2

  

MIDDLE REAR SEAT BELT WARNING LIGHT SWITCH

  

   See I147 MIDDLE REAR SEAT BELT WARNING LIGHT SWITCH

3. Keep the anchorage link and wiring.

Enlarge the image


 Refitting ( Removing )

- Check that the anchorage link with wiring is not damaged.

- Position the anchorage link and wiring.

- Connect the electrical connection for the anchorage link.

- Connect the retainers for the anchorage link wiring.

1. Position the edge of the carpet.

2. Position the edge of the sound insulation.

3. Screw in the anchorage link (3b) fixing bolt (3a) and tighten it to the recommended torque.

 

Component

 

Fixing

 

dia

 

Value (daNm)

 

Validity

 

Seat belt end

 

Screw

 

7/16”

 

3.15 ÷ 3.85

 

    Op. 7040H59 ODDMENTS COMPARTMENT ON REAR SIDE PANEL (ONE), LEFT OR RIGHT - R.R.

- Lower the rear seat cushions.

- Check that the anchorage link and the seat belt not fastened warning light are working properly.