Refitting

- Release the rear seat backrest and tilt it forwards.

1. Undo the nuts (1a) and the bolt (1b).

2. Remove the striker.

Removing

- Check that the striker is not damaged.

- Position the striker.

1. Screw in the nuts and the bolt without tightening them (for the subsequent adjustment).

2. Adjust the position of the striker (2a) with the backrest attachment device; the arrows (2b) indicate the possible movements.

3. Screw in the nuts and the bolt and tighten them to the recommended torque.

- Check that the backrest is correctly attached to the striker.