145 - MiTo   1.4 16v TJet   ANCHORAGE ROD FOR (ONE) REAR SEAT BELT LEFT OR RIGHT - R.R.   7065B14   

Detail     Detail
Removing ( Refitting )

   Op. 7040H59 ODDMENTS COMPARTMENT ON REAR SIDE PANEL (ONE), LEFT OR RIGHT - R.R.


Enlarge the image

1. Undo the anchorage link retaining bolt

2. Disconnect retainers (2a) of wiring (2b) from anchoring tie-rod.

3. Extract the edge (3a) of the mat.

4. Detach the electrical connection from the anchoring tie-rod.

 

 

Description

  

Connector
 

4

  

LEFT REAR SEAT BELT WARNING LIGHT SWITCH

  

   See I145 LEFT REAR SEAT BELT WARNING LIGHT SWITCH
 

4

  

RIGHT REAR SEAT BELT WARNING LIGHT SWITCH

  

   See I146 RIGHT REAR SEAT BELT WARNING LIGHT SWITCH
 

4

  

CENTRAL SEAT BELT WARNING LIGHT SWITCH

  

   See I147 MIDDLE REAR SEAT BELT WARNING LIGHT SWITCH

- Keep the anchorage link with wiring.
Refitting ( Removing )

- Check that the anchorage link with wiring is not damaged.

- Position the anchorage link with wiring.

- Connect the electrical connection of the anchoring tie-rod.

- Position the edge of the carpet.

- Connect retainers of wiring from anchoring tie-rod.

Enlarge the image

1. Screw in the anchorage link bolt and tighten it to the recommended torque.

 

Component

  

Fixing

  

dia

  

Value (daNm)

  

Validity
 

Seat belt end

  

Screw

  

7/16”

  

3.15 ÷ 3.85

  

    Op. 7040H59 ODDMENTS COMPARTMENT ON REAR SIDE PANEL (ONE), LEFT OR RIGHT - R.R.

- Check the correct operation of the anchorage link and the associated seatbelt unfastened warning light.