Removing
(
Refitting
)
 | This procedure is only valid for the 120 bhp version |
|
|
Removing
(
Refitting
)
|
 |
|
|
1. Undo the bolt (1a) securing the gearbox side rigid support reinforcement (1b) to the gearbox. 2. Unscrew nut securing gearbox side rigid support reinforcement (1b) to the power unit rigid support and remove it. |
|
|
Refitting
(
Removing
)
- Refit the gearbox side rigid support reinforcement in its seat and tighten the nut to the recommended torque.
- Tighten the bolt securing the gearbox side rigid support reinforcement to the gearbox to the recommended torque.
|
|
|