Removing
(
Refitting
)
 | This procedure is valid only for the 120 HP version |
|
|
Removing
(
Refitting
)
|
 |
|
|
Op. 1008B30 GEARBOX SIDE SUPPORT FLEXIBLE MOUNTING(S) - REPLACE |
|
|
1. Undo the nut (1a) securing the link to the rigid support (1b). 2. Undo the screws securing the rigid support (1b) to the gearbox and remove it. |
|
|
Refitting
(
Removing
)
- Place the rigid support in its housing and secure it by tightening the screws to the prescribed torque.
- Tighten the nut securing the link to the rigid support to the prescribed torque.
|
|
Op. 1008B30 GEARBOX SIDE SUPPORT FLEXIBLE MOUNTING(S) - REPLACE |
|
|
|
|
|
Removing
(
Refitting
)
|
|
|
- Position the vehicle on a lift. |
|
|
|
|
|
Op. 1008B30 GEARBOX SIDE SUPPORT FLEXIBLE MOUNTING(S) - REPLACE |
|
  |
1. Undo the screws (1a) and remove the power unit rigid support, gearbox side (1b). |
  |
Refitting
(
Removing
)
1. Fit the transmission side power unit rigid support (1a) and tighten the screws (1b) to the prescribed torque.
|
|
|
Op. 1008B30 GEARBOX SIDE SUPPORT FLEXIBLE MOUNTING(S) - REPLACE |
|
|
|
|
|
|
- Remove the vehicle from the lift. |