Removing
(
Refitting
)
 | This procedure is valid only for the 120 HP version |
|
|
Removing
(
Refitting
)
|
 |
- Position the vehicle on a lift. |
|
Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R |
|
1. Undo the bolt (1a), the screws (1b) and remove the bracket (1c). |
|
|
Refitting
(
Removing
)
- Fit the bracket in its seat and tighten the main bolt and the screws to the prescribed torque.
Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R |
|
|
- Remove the vehicle from the lift. |
|
|
Removing
(
Refitting
)
|
|
|
- Position the vehicle on a lift. |
|
|
|
Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R. |
|
Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R |
|
|
  |
1. Undo the screws (1a) and remove the bracket on the gearbox for the lower reaction rod (1b). |
  |
Refitting
(
Removing
)
1. Refit the lower reaction rod bracket (1a) in its seat on the gearbox and tighten the screws (1b) to the prescribed torque.
|
|
|
|
Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R |
|
Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R. |
|
|
|
|
- Remove the vehicle from the lift. |