Removing
(
Refitting
)
 | This procedure is valid only for the 120 HP version |
|
|
Removing
(
Refitting
)
|
 |
- Position the vehicle on a lift. |
|
Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R |
|
1. Undo the screw (1a) and the screw (1b) and remove the link (1c). |
|
|
Refitting
(
Removing
)
- Place the link in position and tighten the screw and the screw to the prescribed torque.
Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R |
|
|
- Remove the vehicle from the lift. |
|
|
Removing
(
Refitting
)
|
|
|
- Position the vehicle on a lift. |
|
|
|
Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R. |
|
Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R |
|
  |
1. Undo the screws (1a), (1b) and remove the gearbox lower reaction rod (1c). |
  |
Refitting
(
Removing
)
1. Place the gearbox lower reaction rod (1a) in its housing and tighten the screws (1b) and (1c) to the prescribed torque.
|
|
|
Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R |
|
Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R. |
|
|
|
|
- Remove the vehicle from the lift. |
|
|
- Remove the vehicle from the lift. |