145 - MiTo   1.4 16v TJet   GPL INJECTOR UNIT WITH CONNECTION PIPES TO PRESSURE REGULATOR DISMANTLE AND REBUILD AT BENCH   1057B68   

Detail     Detail
Removing ( Refitting )

The LPG injector assembly cannot be separated. A single LPG injector is not available at the Spare Parts Dpt.

Enlarge the image

1. Undo the screw (1a) and remove LPG pressure and temperature sensor (1b).

Enlarge the image


 Refitting ( Removing )

1. Place the LPG pressure and temperature sensor (1a) in position and tighten the screw (1b) to the prescribed torque.

 

Component

 

Fixing

 

dia

 

Value (daNm)

 

Validity

 

LPG temperature and pressure sensor

 

Screw

 

-

 

0.8

 

1.4 16V TJet 120 HP

APPLIES TO VERSIONS WITH: Euro 5

Removing ( Refitting )

The LPG injector unit cannot be separated. A single LPG injector is not available at the Spare Parts Dpt.

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

1. Undo the screw (1a) and remove LPG pressure and temperature sensor (1b).

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

1. Undo the bolts (1a) and remove the LPG injector unit mounting bracket (1b).

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image


 Refitting ( Removing )

1. Place the LPG injector unit mounting bracket (1a) back in its housing and tighten the bolts (1b) to the prescribed torque.

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

1. Place the LPG pressure and temperature sensor (1a) in position and tighten the screw (1b) to the prescribed torque.

 

Component

  

Fixing

  

dia

  

Value (daNm)

  

Validity
 

LPG temperature and pressure sensor

  

Screw

  

-

  

0.8

  

1.4 16V TJet 120 HP

APPLIES TO VERSIONS WITH: Euro 6

Removing ( Refitting )

The LPG injector assembly cannot be separated. A single LPG injector is not available from Spare Parts.

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

1. Undo the screw (1a) and remove LPG pressure and temperature sensor (1b).

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

1. Undo the bolts (1a) and remove the LPG injector unit mounting bracket (1b).

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image


 Refitting ( Removing )

1. Place the LPG injector unit mounting bracket (1a) back in its housing and tighten the bolts (1b) to the prescribed torque.

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

1. Place the LPG pressure and temperature sensor (1a) in position and tighten the screw (1b) to the prescribed torque.

 

Component

  

Fixing

  

dia

  

Value (daNm)

  

Validity
 

LPG temperature and pressure sensor

  

Screw

  

-

  

0.8

  

1.4 16V TJet 120 HP