145 - MiTo   1.4 16v TJet   LPG LEVEL SENSOR - R.R.   1043A63   

Detail     Detail
Removing ( Refitting )

- Disconnect the negative battery terminal.

    Op. 1043A13 LPG TANK COVER - R.R.


Enlarge the image

1. Close the LPG tank tap.

2. Disconnect the electrical connection for the LPG level sensor.

 

 

Description

  

Connector
 

2

  

LPG level sensor

  

   See K033 GPL LEVEL SENSOR

3. Disconnect the electrical connection for the LPG intake solenoid valve coil.

 

 

Description

  

Connector
 

3

  

LPG supply solenoid valve

  

   See L095 LPG DELIVERY SOLENOID VALVE

Mark the position of the LPG level sensor relative to the solenoid valve.

Enlarge the image

1. Use a screwdriver to undo the screws (1a) and remove the LPG level sensor (1b).

Do not undo the screws fixing the multivalve to the tank.
Refitting ( Removing )

- Fit the new LPG level sensor in the same position as the one which was removed.

- Tighten the LPG level sensor retaining screws.

- Connect the electrical connection for the LPG intake solenoid valve coil.

- Connect the electrical connection for the LPG level sensor.

    Op. 1043A13 LPG TANK COVER - R.R.

- Connect the (-) battery terminal.

APPLIES TO VERSIONS WITH: Euro 5

Removing ( Refitting )

- Disconnect the negative battery terminal.

APPLIES TO VERSIONS WITH: Euro 5

    Op. 1043A13 LPG TANK COVER - R.R.

    Op. 1043A17 LPG INTAKE SOLENOID VALVE COIL - R.R.

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

1. Close the LPG tank tap.

2. Disconnect the electrical connection for the LPG level sensor.

 

 

Denomination

  

Connector
 

2

  

LPG level sensor

  

   See K033 GPL LEVEL SENSOR

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

Mark the position of the LPG level sensor relative to the solenoid valve.

1. Use a screwdriver to undo the screws (1a) and remove the LPG level sensor (1b).

Do not undo the screws fixing the multivalve to the tank.

APPLIES TO VERSIONS WITH: Euro 5

Refitting ( Removing )

- Fit the new LPG level sensor in the same position as the one which was removed.

- Tighten the LPG level sensor retaining screws.

- Connect the electrical connection for the LPG level sensor.

APPLIES TO VERSIONS WITH: Euro 5

    Op. 1043A17 LPG INTAKE SOLENOID VALVE COIL - R.R.

    Op. 1043A13 LPG TANK COVER - R.R.

APPLIES TO VERSIONS WITH: Euro 5

- Connect the (-) battery terminal.

APPLIES TO VERSIONS WITH: Euro 6

Removing ( Refitting )

- Disconnect the (-) battery terminal.

APPLIES TO VERSIONS WITH: Euro 6

    Op. 1043A13 LPG TANK COVER - R.R.

    Op. 1043A17 LPG INTAKE SOLENOID VALVE COIL - R.R.

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

1. Close the LPG tank tap.

2. Detach the electrical connection for the LPG level sensor.

 

 

Name

  

Connector
 

2

  

LPG level sensor

  

   See K033 GPL LEVEL SENSOR

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

Mark the position of the LPG level sensor relative to the solenoid valve.

1. Use a screwdriver to undo the screws (1a) and remove the LPG level sensor (1b).

Do not undo the screws fixing the multivalve to the tank.

APPLIES TO VERSIONS WITH: Euro 6

Refitting ( Removing )

- Fit the new LPG level sensor in the same position as the one which was removed.

- Tighten the LPG level sensor fixing screws.

- Connect the electrical connection for the LPG level sensor.

APPLIES TO VERSIONS WITH: Euro 6

    Op. 1043A17 LPG INTAKE SOLENOID VALVE COIL - R.R.

    Op. 1043A13 LPG TANK COVER - R.R.

APPLIES TO VERSIONS WITH: Euro 6

- Connect the (-) battery terminal.