145 - MiTo   1.4 16v TJet   SENSOR BRACKET ON FRONT SHOCK ABSORBER DOME (ONE), LH OR RH - R.R.   4440B52   

Detail     Detail
Removing ( Refitting )

If the body acceleration sensor in the luggage compartment is replaced, connect Examiner and calibrate the accelerometers.

    Op. 7040H80 REAR PARCEL SHELF - R.R.

    Op. 7040B06 SIDE TRIM (ONE) LEFT OR RIGHT, LOAD COMPARTMENT/LOAD PLATFORM - R.R.


Enlarge the image

1. Disconnect the electrical connection for the body acceleration sensor in the luggage compartment.

 

 

Description

  

Connector
 

1

  

Rear vertical acceleration sensor (bodyshell)

  

   See K012 Rear vertical acceleration sensor (bodyshell)

2. Undo the screw (2a) and remove the body acceleration sensor in the luggage compartment (2b).
Refitting ( Removing )

- Position the body acceleration sensor in its housing in the luggage compartment and tighten the screw.

- Connect the electrical connection for the body acceleration sensor in the luggage compartment.

    Op. 7040B06 SIDE TRIM (ONE) LEFT OR RIGHT, LOAD COMPARTMENT/LOAD PLATFORM - R.R.

    Op. 7040H80 REAR PARCEL SHELF - R.R.