Removing
(
Refitting
)
 | If the body acceleration sensor on shock absorber front left or front right dome is replaced, connect Examiner and calibrate the accelerometers. |
|
|
Removing
(
Refitting
)
|
|
|
|
|
|
  |
1. Disconnect the electrical connection for the body acceleration sensor on the front left shock absorber dome.
2. Undo the screw (2a) and remove the body acceleration sensor on front left shock absorber dome (2b). |
  |
Refitting
(
Removing
)
1. Place the body acceleration sensor in its housing on the front left shock absorber dome and engage the centring pin. 2. Tighten the screw fixing the body acceleration sensor on the front left shock absorber dome. 3. Connect the electrical connection for the body acceleration sensor on the front left shock absorber dome.
|
|
|
|
|
|