Refitting

   Op. 5530B10 BATTERY - R+R

   Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

1. Remove the rivet (1a) using a drill. Remove the parts of the rivet.

2. Undo the nut.

3. Remove the mounting (3a) complete with battery fixing belt (3b), after raising the bracket slightly (3c).

Removing

- Check that the belt with mounting is not damaged.

1. Position the mounting (1a) with battery fixing belt (1b), after raising the bracket slightly (1c).

2. Screw in the nut and tighten it to the recommended torque.

3. Fit the new rivet.

    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

    Op. 5530B10 BATTERY - R+R

Refitting

   Op. 5530B10 BATTERY - R+R

   Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

1. Release the wiring retainers (1a) from the mounting (1b), using the appropriate tool.

2. Remove the rivet (2a) using a drill. Keep the parts of the rivet.

3. Undo the nut.

4. Remove the mounting (1b) complete with battery fixing belt (4a), after raising the bracket slightly (4b).

Removing

- Check that the belt and mounting are not damaged.

1. Position the mounting (1a) complete with battery fixing belt (1b), after raising the bracket (1c) slightly.

2. Screw in the nut and tighten it to the prescribed torque.

3. Fit the new rivet.

4. Engage the retainers (4a) of the wirings to the mounting (1a).

    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

    Op. 5530B10 BATTERY - R+R