145 - MiTo   1.4 16v TJet   BATTERY EARTH LEAD - R+R   5530B22   

Detail     Detail


Enlarge the image


Removing ( Refitting )

- Position the vehicle on a lift.

- Disconnect the negative battery terminal.

1. Undo the nut (1a) and disconnect the electrical connection (1b) from the negative battery terminal.

 

 

Description

 

Connector

 

1b

 

BATTERY

 

   See A001 BATTERY

    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE -R.R.


Enlarge the image


1. Undo the nut (1a) and disconnect the end (1b) of the earth lead from the chassis.

 

 

Description

 

Connector

 

1b

 

BATTERY EARTH ON BODY

 

   See C003 BATTERY EARTH ON BODYSHELL

2. Disconnect the earth lead from the retaining band.


Enlarge the image


1. Undo the bolt (1a) and disconnect the end (1b) of the earth lead from the gearbox casing.

 

 

Description

 

Connector

 

1b

 

BATTERY EARTH ON ENGINE

 

   See C002 BATTERY EARTH ON ENGINE

The position of the terminal (1b) on the gearbox casing may change depending on the type of gearbox fitted.

2. Remove the battery earth lead.


Enlarge the image


Refitting ( Removing )

- Check that the battery earth lead is not damaged and that the individual conductors are correctly fastened to the connections.

If necessary, carry out continuity tests.

1. Position the battery earth lead.

2. Connect the end (2a) of the earth lead to the gearbox casing and screw in the bolt (2b), then tighten it to the recommended torque.

 

Component

 

Fixing

 

dia

 

Value (daNm)

 

Validity

 

Earth lead on gearbox

 

Screw

 

M10

 

1.2 ÷ 1.8

 


Enlarge the image


 

Component

 

Fixing

 

dia

 

Value (daNm)

 

Validity

 

Battery earth lead on strut

 

Nut

 

M8

 

1.2 ÷ 1.8

 

2. Connect the earth lead to the retaining band.


Enlarge the image


1. Connect the electrical connection (1a) to the negative battery terminal and tighten the nut (1b).

- Connect the negative terminal to the battery.

- Check that the electrical system is working.

APPLIES TO VERSIONS WITH: GPL, Euro 5, Euro 6

Removing ( Refitting )

- Position the vehicle on a lift and raise it.

- Disconnect the negative battery terminal.

   Op. 7055B54 PROTECTION/GUARD UNDER ENGINE -R.R.

APPLIES TO VERSIONS WITH: GPL, Euro 5, Euro 6


Enlarge the image


1. Undo the screw (1a) and disconnect the end (1b) of the earth lead from the gearbox casing.

The position of the terminal (1b) on the gearbox casing may change depending on the type of gearbox fitted.

 

 

Denomination

 

Connector

 

1b

 

BATTERY EARTH ON ENGINE

 

   See C002 BATTERY EARTH ON ENGINE

2. Undo the nut (2a) and disconnect the terminal (2b) of the earth lead from the chassis.

 

 

Denomination

 

Connector

 

2b

 

BATTERY EARTH ON BODYSHELL

 

   See C003 BATTERY EARTH ON BODYSHELL

APPLIES TO VERSIONS WITH: GPL, Euro 5, Euro 6

- Lower the vehicle.

APPLIES TO VERSIONS WITH: GPL, Euro 5, Euro 6


Enlarge the image


1. Unscrew the nut (1a) and disconnect the electrical connection (1b) from the negative battery terminal (1c).

2. Open the retaining bands (2a) and remove the battery earth lead (2b).

 

 

Denomination

 

Component

 

1b

 

BATTERY

 

   See A001 BATTERY

APPLIES TO VERSIONS WITH: GPL, Euro 5, Euro 6


Enlarge the image


Refitting ( Removing )

- Check that the battery earth lead is not damaged and that the individual conductors are correctly fastened to the connections.

If necessary, carry out continuity tests.

1. Position the battery earth lead (1a) and engage it with the retaining bands (1b).

2. Connect the electrical connection (2a) to the negative battery terminal (2b), then tighten the nut (2c).

 

Component

 

Fixing

 

dia

 

Value (daNm)

 

Validity

 

Negative battery terminal

 

Nut

 

M6

 

0.4 ÷ 0.6

 

APPLIES TO VERSIONS WITH: GPL, Euro 5, Euro 6


Enlarge the image


- Raise the vehicle.

1. Connect the terminal (1a) of the earth lead to the chassis, then tighten the nut (1b) to the prescribed torque.

 

Component

 

Fixing

 

dia

 

Value (daNm)

 

Validity

 

Battery earth lead on strut

 

Nut

 

M8

 

1.2 ÷ 1.8

 

2. Connect the terminal (2a) of the earth lead to the gearbox casing, then tighten the screw (2b) and tighten to the prescribed torque.

 

Component

 

Fixing

 

dia

 

Value (daNm)

 

Validity

 

Earth lead on gearbox

 

Screw

 

M10

 

1.2 ÷ 1.8

 

APPLIES TO VERSIONS WITH: GPL, Euro 5, Euro 6

    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE -R.R.

- Connect the negative battery terminal.

- Remove the vehicle from the lift.