145 - MiTo   1.4 16v TJet   RPM SENSOR COIL OPERATION CHECK   5510CD   
 

STEP

  

CHECK TO BE PERFORMED

  

REMEDIAL ACTION IF THE CHECK IS NOT OK
 

1

  

Sensor resistance check

Disconnect the electrical connection for the control unit side sensor and leave it disconnected.

Using an Examiner in Ohmmeter mode, connect the probes between pins 1 and 2 of the sensor. The reading should show a resistance of 1134 to 1386 Ohms at 20°C

  

Replace the rpm sensor

   Op. 5510C26 ENGINE RPM SENSOR - R+R

Rpm sensor