Removing
(
Refitting
)
Proceed as described below for left hand drive versions
|
|
Removing
(
Refitting
)
Proceed as described below for left hand drive versions |
|
|
|
|
  |
1. Unscrew the brake-clutch fluid reservoir plug and fit the tool.
|
  |
1. Move the clip back and disconnect damper from the master cylinder. - Open the intermediate pipe retaining clips. |
  |
1. Adjust the retaining clip (1a), disconnect the pipe (1b) complete with vibration damper and remove it. |
  |
1. Adjust up the spring (1a) and disconnect the vibration damper (1b) from the pipe (1c). |
|
|
Refitting
(
Removing
)
- Connect the vibration damper to the pipe and close the retaining clip. - Place the vibration damper complete with pipe back in its housing, connect it to the master cylinder and attach the retaining clip. - Connect the pipe to the additional vibration damper and engage the retaining clip. - Close the intermediate pipe retaining clips from the vibration damper to the operating cylinder. |
|
|
|
|
|
|
|
Removing
(
Refitting
)
Proceed as described below for right hand drive versions |
|
|
|
|
  |
1. Lift up the retaining clip (1a) and disconnect the pipe (1b) from the vibration damper. |
  |
1. Lift up the retaining clip (1a) and disconnect the pipe (1b) from the additional vibration damper, then remove it. |
|
|
Refitting
(
Removing
)
- Place the pipe in its housing and fasten it to the additional vibration damper with the retaining clip. - Connect the pipe to the vibration damper and fasten it using the retaining band. |
|
|
|