Removing
(
Refitting
)
1. Unscrew the brake-clutch fluid reservoir plug and fit the tool.
|
Tool |
Name |
Function |
Validity |
|
2000001400 |
Plug |
Brake/clutch system vacuum |
|
|
Removing
(
Refitting
)
1. Unscrew the brake-clutch fluid reservoir plug and fit the tool.
|
  |
1. Undo the bolts (1a) and move the engine coolant reservoir (1b) to one side. |
  |
1. Release the retaining clip (1a) and disconnect the clutch fluid pipe (1b) from the three-way connector. |
  |
1. Release the retaining clip (1a) and remove the three-way connector (1b) from the clutch hydraulic actuator. |
|
|
Refitting
(
Removing
)
- Refit the three-way connector and fasten the retaining clip. - Connect the clutch fluid pipe to the three-way connector and secure it using the retaining clip. - Fit the engine cooling supply reservoir in place and secure it to the front end using the bolts. |
|
|
|