Removing
(
Refitting
)
- Position the vehicle on a lift.
|
|
Removing
(
Refitting
)
- Position the vehicle on a lift. |
  |
1. Unscrew the brake-clutch fluid reservoir plug and fit the tool.
|
  |
1. Undo the connector (1a) and release the rigid pipe from the connector to the left rear brake from the retaining clips (1b). |
  |
1. Undo the connector (1a), open the retaining clip and remove the rigid pipe from the connector to the left rear brake (1b). |
  |
Refitting
(
Removing
)
1. Place the rigid pipe from the connector to the left rear brake (1a) in position, attach the retaining clip (1b) and tighten the connector (1c) to the recommended torque.
|
  |
1. Tighten the connector (1a) to the recommended torque and close the retaining clips (1b) for the rigid pipe from the connector to the left rear brake.
|
|
|
|
|
|
- Remove the vehicle from the lift. |