Refitting

- Position the vehicle on a lift.

1. Unscrew the brake-clutch fluid reservoir plug and fit the tool.

1. Undo the connector (1a) and open the retaining clips (1b).

1. Release the rigid pipe from the connector to the right rear brake from the intermediate retaining clips.

1. Open the retaining clip (1a), undo the connector (1b) and remove the rigid pipe from the connector to the right rear brake (1c).

Removing

1. Place the rigid pipe from the connector to the right rear brake (1a) in position, close the retaining clip (1b) and tighten the connector (1c) to the recommended torque.

1. Tighten the connector (1a) to the recommended torque and close the retaining clips (1b).

- Remove the vehicle from the lift.