Removing
(
Refitting
)
- Position the vehicle on a lift.
|
|
Removing
(
Refitting
)
- Position the vehicle on a lift. |
  |
1. Unscrew the brake-clutch fluid reservoir plug and fit the tool.
|
|
|
|
|
|
  |
1. Undo the connector for the rigid pipe from the hydraulic control unit to the left front brake, control unit side. |
  |
1. Undo the connector (1a), open the retaining clip (1b) and remove the rigid pipe from the hydraulic control unit to the left front brake (1c). |
  |
Refitting
(
Removing
)
1. Place the rigid pipe from the hydraulic control unit to the left front brake (1a) in position, tighten the connector (1b) to the recommended torque and close the retaining clip (1c).
|
  |
1. Tighten the connector for the rigid pipe from the hydraulic control unit to the left front brake, control unit side to the recommended torque.
|
|
|
|
|
|
|
|
|
- Remove the vehicle from the lift. |