Removing
(
Refitting
)
- Position the vehicle on a lift.
|
|
Removing
(
Refitting
)
- Position the vehicle on a lift. |
  |
1. Unscrew the brake-clutch fluid reservoir plug and fit the tool.
|
|
|
|
  |
1. Remove the clip (1a) and undo the connector (1b) for the rigid pipe to the rear brake. 2. Undo the connector and remove the flexible pipe from the brake caliper. |
  |
Refitting
(
Removing
)
1. Place the flexible pipe back in position, connect it to the brake caliper and tighten the connector to the recommended torque.
2. Tighten the connector (2a) to the recommended torque and fit the retaining clip (2b).
|
|
|
|
|
|
|
- Remove the vehicle from the lift. |