145 - MiTo   1.4 16v TJet   BLUETOOTH ELECTRONIC CONTROL UNIT - R.R.   5570T49   

Detail     Detail
Removing ( Refitting )

   Op. 5570T80 CAR RADIO EQUIPMENT - R+R

- Or, alternatively

   Op. 5580M02 PANEL FOR ON-BOARD NAVIGATOR/RADIO/AUDIO CD PLAYER - R.R.


Enlarge the image

1. Insert the tools (1a) fully in the housings (1b) in the Bluetooth ECU.

 

Tool

  

Name

  

Function

  

Validity
 

2000027600

  

Forks

  

Radio extraction

  

2. Engage the tools (1a), push them inwards and pull them towards yourself. Extract the Bluetooth ECU (2a) and release it from its retainers (2b).

Enlarge the image

1. Disconnect the antenna and ECU connections (1a, 1b, 1c).

 

 

Description

  

Connector
 

1c

  

BLUETOOTH CONTROL UNIT

  

   See M162 BLUETOOTH CONTROL UNIT

2. Keep the Bluetooth control unit.
Refitting ( Removing )

- Check that the Bluetooth control unit is not damaged.

- Connect the electrical connections.

- Place the Bluetooth ECU in position and attach the retainers. Take care not to pinch the electrical wires.

   Op. 5570T80 CAR RADIO EQUIPMENT - R+R

- Or, alternatively

   Op. 5580M02 PANEL FOR ON-BOARD NAVIGATOR/RADIO/AUDIO CD PLAYER - R.R.

- Connect the battery.

The control unit must be connected electrically at least 5 minutes before the key on.

Some of the CAN nodes, including the Bluetooth control unit, are programmed with default settings that the customer will find when they purchase the vehicle. If the control unit is being replaced, the Parts Dept. will send a pristine component: once fitted, the data memorised in the Body Computer must be transferred to it by carrying out the PROXY ALIGNMENT procedure using the Examiner.

- Test the operation of the systems involved.