Refitting

1. Lower the steering wheel position adjustment lever to the end of its travel.

2. Unscrew the steering column lower cover bolts.

3. Remove the lower steering wheel cover by releasing it from its seat.

1. Release the retainers (1a) of the flexible cover (1b) of the steering column.

1. Unscrew the bolts.

2. Move the instrument panel slightly.

3. Detach the electrical connection.

4. Keep the control panel.

Removing

- Check that the control panel is not damaged.

- Connect the electrical connection.

- Position the control panel.

- Screw in the bolts.

- Engage the retainers of the flexible cover of the steering column.

- Arrange the lower steering wheel cover and engage it in its seat.

- Tighten the lower steering column trim bolts.

- Adjust the steering wheel to the correct position.

Several of the CAN nodes, including the instrument panel, are programmed with default settings that the customer will find when they acquire the vehicle. If the panel is replaced, the Parts Dept. will send a "pristine" component. once fitted, the data memorized in the Body Computer must be transferred to it by carrying out the "PROXY ALIGNMENT" procedure using the Examiner.

- Check that the control panel instruments are working.