Refitting

   Op. 5570T80 CAR RADIO EQUIPMENT - R+R

1. Work inside the radio compartment and loosen the ECU fastening screws (1a).

1. Working under the ECU, remove the cover (1a) by releasing the lower retainers (1b) and then the retainers (1c).

1. Loosen the screws (1a) securing the ECU (1b).

1. Push the ECU towards the inside of the dashbaord, turn it and extract it.

2. Detach the electrical connection.

3. Keep the control unit.

1. Release the support (1a) from the ECU if needed.

Removing

- Check that the control unit is not damaged.

- If removed, engage the support on the ECU.

- Connect the electrical connection.

- Place the control unit in position.

- Tighten the control unit bolts.

- Position the cover and engage the retainers.

   Op. 5570T50 BLUETOOTH ELECTRONIC CONTROL UNIT MOUNTING - R.R.