- Check that the brake fluid in the reservoir is at the maximum level, otherwise top up using the recommended fluid.
- When topping up the brake fluid, remove the reservoir cap and top up using the recommended fluid until the maximum level is reached.
|
Component |
Type |
Name |
Classification |
Q.ty |
Validity |
|
BRAKE-CLUTCH HYDRAULIC CIRCUIT |
Fluid [kg] |
TUTELA TOP 4/S Contractual Technical Reference N. F001.A93 |
FMVSS no. 116 DOT 4, ISO 4925 SAE J1704- FIAT 9.55597 or MS.90039 |
0.5 |
|
The fluid in the reservoir should not exceed the MAX notch. |
|
|
The symbol on the tank identifies synthetic brake fluids, distinguishing them from mineral fluids. Using mineral-based fluids irreparably damages the special braking system rubber seals. |
|
Take great care to prevent the brake fluid, which is extremely corrosive, from coming into contact with the paintwork. If this does happen, wash immediately with hot water. |
|
|
Brake fluid is poisonous and highly corrosive. In the event of accidental contact, immediately wash the affected parts with water and neutral soap, then rinse thoroughly. Call a doctor immediately if swallowed. |