145 - MiTo   1.4 16v TJet   CHANGE MANUAL GEARBOX OIL   0010T40   

Detail     Detail

This procedure is valid only for the 120 HP version

Changing the manual gearbox oil is not a scheduled maintenance operation and is only carried out during overhaul operations involving removing/refitting of internal components. Therefore, in all other removing/refitting operations, the manual gearbox oil must be reused.

The collection of manual gearbox oil and its storage before use must be made in a clean container, with a protection cover.

Possible foreign bodies in the container or in the storage area can compromise the reutilisation of the manual gearbox oil.

- Position the vehicle on a lift.

    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE -R.R.

1. Undo the gearbox casing filler plug.

1. Undo the gearbox casing drain plug and collect oil in a suitable container.

Collect the transmission fluid in a suitable container.

Do not let the fluid disperse into the environment as uncontrolled dispersion of this product causes pollution.

- Clean the drain plug, put it back in its seat and tighten it to the recommended torque.

 

Component

  

Fastening

  

Ø

  

Value (daNm)

  

Validity
 

Gearbox oil drain plug

  

Plug

  

M22

  

4.6

  

1.4 16v TJet 120 HP

1.4 Turbo Multi Air (5 GEAR)

1.3 Multijet 85/95 HP

- Refill the gearbox with the specified fluid through the filler opening.

- Check that the oil level just touches the lower edge of the filler opening.

 

Component

  

Type

  

Name

  

Classification

  

Q.ty

  

Validity
 

MANUAL GEARBOX/DIFFERENTIAL

  

Oil [l]

  

TUTELA TRANSMISSION GEAR FORCE

Contractual

Technical

Reference

N. F002.F10

  

SAE 75W

FIAT 9.55550-MZ6

  

2.0

  

1.4 16v TJet 120 HP

- Clean the filler plug, put back in its housing and tighten to the recommended torque.

 

Component

  

Fastening

  

Ø

  

Value (daNm)

  

Validity
 

Gearbox oil filler plug

  

Plug

  

M22

  

2.0 – 3.0

  

1.4 16v TJet 120 HP

1.4 Turbo Multi Air (5 GEAR)

1.3 Multijet 85/95 HP

    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE -R.R.

- Remove the car from the lift.

This procedure is valid only for the 155 HP version

Changing the manual gearbox oil is not a scheduled maintenance operation and is only carried out during overhaul operations involving removing/refitting of internal components. Therefore, in all other removing/refitting operations, the manual gearbox oil must be reused.

The collection of manual gearbox oil and its storage before use must be made in a clean container, with a protection cover.

Possible foreign bodies in the container or in the storage area can compromise the reutilisation of the manual gearbox oil.

    Op. 0010T41 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARY

APPLIES TO VERSIONS WITH: TCT Automatic Transmission

- Place the car on a lift.

APPLIES TO VERSIONS WITH: TCT Automatic Transmission

- Add oil of the specified type and quantity through the inlet opening.

 

Component

  

Type

  

Name

  

Classification

  

Q.ty

  

Validity
 

MANUAL GEARBOX/DIFFERENTIAL

- Following partial operations on vehicle

  

Oil [l]

  

TUTELA TRANSMISSION GEAR FORCE

Contractual

Technical

Reference

N. F002.F10

  

SAE 75W

FIAT 9.55550-MZ6

  

1,765

  

1.4 Turbo MultiAir 135 HP (6 SPEEDS)

1.4 Turbo MultiAir 170 HP

1.6 JTD 16v (C635)
 

Component

  

Type

  

Name

  

Classification

  

Q.ty

  

Validity
 

MANUAL GEARBOX/DIFFERENTIAL

- Following gearbox dismantling/overhaul:

  

Oil [l]

  

TUTELA TRANSMISSION GEAR FORCE

Contractual

Technical

Reference

N. F002.F10

  

SAE 75W

FIAT 9.55550-MZ6

  

2.0

  

1.4 Turbo MultiAir 135 HP (6 SPEEDS)

1.4 Turbo MultiAir 170 HP

1.6 JTD 16v (C635)