145 - MiTo   1.4 16v TJet   WHEEL SIDE CONSTANT VELOCITY JOINT (ONE), L/H OR R/H - R + R WITH DRIVESHAFT REMOVED - INCLUDES BOOT REPLACEMENT   2710A20   

Detail     Detail
Removing ( Refitting )

This procedure is valid only for the 120 HP version.

- Position the driveshaft in a vice fitted with protective jaws.

Enlarge the image

1. Loosen the gaiter retaining bands and retract it.

Enlarge the image

1. With the tools (1a) and (1b) remove the constant velocity joint from the wheel side (1c).

 

Tool

  

Name

  

Function

  

Validity
 

1845062000

  

Connector

  

Removing wheel side constant velocity joint

  

 

Tool

  

Name

  

Function

  

Validity
 

1847017001

  

Mallet

  

Removing wheel side constant velocity joint

  


Enlarge the image

1. Remove the protective boot.
Refitting ( Removing )

- Wash the constant velocity joint components thoroughly and visually inspect that there are no signs of seizing or grooves on the balls or seats.

- Fill the constant velocity joint with the prescribed grease.

 

Component

 

Type

 

Name

 

Classification

 

Q.ty

 

Validity

 

Wheel side constant velocity joint

 

Grease (g)

 

TUTELA ALL STAR

Contractual

Technical

Reference

No. F702.G07

 

NLGI 1- 2

FIAT 9.55580

 

120 +/- 10

 

1.4 16v TJet 120 HP

1.4 Turbo MultiAir

- Position the new protective boot on the driveshaft.

- Place the constant velocity joint in its seat and tighten the new protection boot retaining clamps.

- Remove the driveshaft from the vice.
Removing ( Refitting )

This procedure is valid only for the 155 HP version.

- Position the driveshaft in a vice fitted with protective jaws.

Enlarge the image

1. Loosen the gaiter retaining bands and retract it.

Enlarge the image

1. With the tools (1a) and (1b) remove the constant velocity joint from the wheel side (1c).

 

Tool

  

Name

  

Function

  

Validity
 

1845062000

  

Connector

  

Removing wheel side constant velocity joint

  

 

Tool

  

Name

  

Function

  

Validity
 

1847017001

  

Mallet

  

Removing wheel side constant velocity joint

  


Enlarge the image

1. Remove the protective boot.
Refitting ( Removing )

- Wash the constant velocity joint components thoroughly and visually inspect that there are no signs of seizing or grooves on the balls or seats.

- Fill the constant velocity joint with the prescribed grease.

 

Component

 

Type

 

Name

 

Classification

 

Q.ty

 

Validity

 

Wheel side constant velocity joint

 

Grease (g)

 

TUTELA ALL STAR

Contractual

Technical

Reference

No. F702.G07

 

NLGI 1- 2

FIAT 9.55580

 

110 +/- 10

 

1.4 16v TJet 155 HP

1.6 JTD 16v

- Position the new protective boot on the driveshaft.

- Place the constant velocity joint in its seat and tighten the new protection boot retaining clamps.

- Remove the driveshaft from the vice.