Refitting

   Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Undo the nut (1a) and the bolt (1b) and remove the engine oil vapour inlet pipe mounting bracket (1c).

1. Disconnect the electrical connections for the ignition coils.

2. Unscrew the bolt securing the cable loom duct.

3. Raise the retaining clip and move the cable loom duct away form the ignition coils.

1. Undo the bolts (1a) and remove the ignition coils (1b).

Removing

1. Fit the ignition coils (1a) in place and tighten the bolts (1b) to the recommended torque.

- Place the cable loom duct in position, attach the retaining clip and tighten the bolt.

- Connect the electrical connections for the ignition coils.

- Place the engine oil vapour pipe mounting bracket in its housing and tighten the fastenings.

    Op. 1080D24 ENGINE OIL VAPOUR INTAKE PIPE - R + R