Refitting

   Op. 5530B10 BATTERY - R+R

1. Undo the nuts (1a) and remove the wiring mounting bracket (1b).

1. Detach the electrical connection for the throttle body.

2. Undo the bolts (2a) and remove the throttle body (2b).

- Remove the O-ring from the intake chamber.

Removing

1. Fit a new O-Ring on the intake chamber.

- Place the throttle body back in its housing and tighten the bolts.

- Connect the electrical connection for the throttle body.

- Place the wiring holder bracket in position and tighten the nuts.

    Op. 1048B30 AIR SUPPLY HOSE FROM RIGID PIPE TO THROTTLE BODY - REPLACE