|
|
|
| Service News | ||
|
|
Alfa MiTo
1.4 16v - 1.4 16v Turbo (Tjet) - 1.3 Mjet - 1.6 Mjet with Start&Stop |
|
|||
| 5505 1 641 RA |
BODY COMPUTER – HAZARD LIGHTS BUZZER
Buzzer not synchronised with hazard lights and/or incorrect signalling of alarm system engagement - Service Solution |
|||
FAULT COMPLAINED OF
The Customer complains of one or both of the following faults:
-the acoustic signal of the buzzer in the instrument panel is not synchronised with the switching on of the hazard lights (only cars without Start&Stop)-incorrect signalling of the alarm system engagement (cars with or without Start&Stop)TECHNICAL CAUSE
Incorrect Body Computer software parameters.
OPERATIONS IN PRODUCTION
Adoption of Body Computer with improved software.
IPLEMENTATION OF MODIFICATION
|
Version |
Factory |
Line |
Chassis No. |
Organization No. |
|
All models in question |
Mirafiori |
- |
1086314 |
85008 |
OPERATIONS IN NETWORK
Network behaviour standards towards the Customer
-If the claimed fault is confirmed, reassure the Customer that it can be solved by reprogramming the Body Computer.-After the intervention, check the work done and make sure that the Customer is satisfied.Service Solution
If the customer''s claimed fault is confirmed, reprogramme the Body Computer control unit using the new software CD Flash 6.03.0 (or higher) available on the Examiner Web according to the Operating Cycle below.
OPERATION CYCLE
If the claimed fault is found, use Examiner with release 8.00.0 (or higher), to reprogramme the Body Computer using CD Flash 6.03.0 (or higher) available from Examiner WEB.
 | The vehicle battery must be in full charge conditions or supported by a battery charger/booster battery so as to ensure a rated voltage of 12 V, during reprogramming. |
Control unit codes
| The following information is available on Examiner WEB as well. |
The following tables show the hardware (HW) and software (SW) codes of the Body Computer Delphi (EP), before and after reprogramming.
1.4 16v - 1.4 16v Turbo (Tjet) - 1.3 Mjet - 1.6 Mjet
|
Before programming, the control unit must have the following data | |||
|
HW number |
HW version |
SW number |
SW version |
|
FI64BC03OL0 |
03 |
28181862 |
0502 |
|
FI64BC03OL0 |
03 |
28181862 |
0503 |
|
FI64BC03OL0 |
03 |
28209144 |
0504 |
|
FI64BC03OL0 |
03 |
28242399 |
0505 |
|
After programming, the control unit must have the following data | |||
|
HW number |
HW version |
SW number |
SW version |
|
FI64BC03OL0 |
03 |
28242399 |
0506 |
|
Before programming, the control unit must have the following data | |||
|
HW number |
HW version |
SW number |
SW version |
|
FI64BC03OL1 |
03 |
28181862 |
0502 |
|
FI64BC03OL1 |
03 |
28181862 |
0503 |
|
FI64BC03OL1 |
03 |
28209144 |
0504 |
|
FI64BC03OL1 |
03 |
28242399 |
0505 |
|
After programming, the control unit must have the following data | |||
|
HW number |
HW version |
SW number |
SW version |
|
FI64BC03OL1 |
03 |
28242399 |
0506 |
|
Before programming, the control unit must have the following data | |||
|
HW number |
HW version |
SW number |
SW version |
|
FI64BC03SL4 |
03 |
28181862 |
0503 |
|
FI64BC03SL4 |
03 |
28209144 |
0504 |
|
FI64BC03SL4 |
03 |
28242399 |
0505 |
|
After programming, the control unit must have the following data | |||
|
HW number |
HW version |
SW number |
SW version |
|
FI64BC03SL4 |
03 |
28242399 |
0506 |
|
Before programming, the control unit must have the following data | |||
|
HW number |
HW version |
SW number |
SW version |
|
FI64BC03SL5 |
03 |
28181862 |
0503 |
|
FI64BC03SL5 |
03 |
28209144 |
0504 |
|
FI64BC03SL5 |
03 |
28242399 |
0505 |
|
After programming, the control unit must have the following data | |||
|
HW number |
HW version |
SW number |
SW version |
|
FI64BC03SL5 |
03 |
28242399 |
0506 |
CLAIM REPORT DATA
|
Version |
Operation |
Piece |
Fault |
Position |
Time allowance |
|
All models in question |
5505164 |
1 |
RA |
- |
0.30 |