OPERATIONS IN NETWORK

On all versions, during the routine P.D.I. operations or before the final handover, it is necessary to:

-Check that the key for replacing the front direction indicator bult is present.-Check that the alcohol tester kit is present.-Set the radio for specific operation for South American markets.

OPERATION CYCLE

Key for replacing front director indicator bulb

Check that the key (A - Fig. 1) is present in the document holder.

Fig. 1

The correct use of the key for replacing the direction indicator bulb is described below:

-Take the key (A - Fig. 1) out of the document holder.-Insert the key (1 - Fig. 2) in the housing (2), then turn anti-clockwise and extract the bult (3).

Fig. 2

Alcohol tester key

Check that the alcohol tester kit is present inside the passenger side glove compartment.

The kit consists of an envelope, illustrated in (Fig. 3) containing all the medical products for checking alcohol levels.

The envelope also contains instructions for the correct use of the kit.

Remind the customer that, like all medical products, the alcohol tester kit has an expiry date and therefore needs replacing when the contents are past their date.

Fig. 3

Radio setting for specific markets

If the vehicle is destined for South America, the radio must be set for the specific market as follows:

-Switch the radio on and within 5 seconds press the buttons shown simultaneously (A and B - Fig. 4)

Fig. 4

-Depending on the type of radio/display, the words illustrated in figure 5 should appear.

Fig. 5

Key:

A. 8 digit display

B. 20 digit display

C. 12 digit display on two lines