Removing
(
Refitting
)
1. Loosen the band and disconnect the vacuum pipe from the intake chamber.
- Open the brake servo vacuum pipe intermediate retaining clip.
|
|
Removing
(
Refitting
)
1. Loosen the band and disconnect the vacuum pipe from the intake chamber. - Open the brake servo vacuum pipe intermediate retaining clip. |
  |
1. Prise up and remove the vacuum pipe connector from the brake servo. - Remove the vacuum pipe, complete with single-acting valve, from the brake servo. |
|
|
Refitting
(
Removing
)
- Refit the vacuum pipe complete with single-acting valve and secure it to the brake servo using the connector. - Close the brake servo vacuum pipe intermediate retaining clip. - Connect the vacuum pipe to the intake chamber and tighten the band. |