145 - MiTo   1.4 16v TJet   BRAKE FLUID MINIMUM W/L SWITCH - R + R   3330C44   

Detail     Detail

Removing ( Refitting )

Proceed as described below for left hand drive versions

    Op. 5530B10 BATTERY - R+R


Enlarge the image


1. Disconnect the electrical connection for the brake fluid level switch.

 

 

Description

 

Connector

 

1

 

Brake fluid level sensor (switch)

 

   See K025 BRAKE FLUID LEVEL SENSOR (SWITCH)

2. Compress the spring and simultaneously remove the minimum brake fluid level warning light switch from the reservoir.

Refitting ( Removing )

- Place the brake fluid level switch in its housing until engaging the retaining clip and connect the electrical connector.

    Op. 5530B10 BATTERY - R+R

Removing ( Refitting )

Proceed as described below for right hand drive versions

    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.


Enlarge the image


1. Disconnect the electrical connection for the brake fluid minimum level warning light switch.

 

 

Description

 

Connector

 

1

 

Brake fluid level sensor (switch)

 

   See K025 BRAKE FLUID LEVEL SENSOR (SWITCH)

2. Undo the fasteners (2a) and release the brake/clutch fluid reservoir assembly (2b).


Enlarge the image


1. Compress the clip (1a) and remove the minimum brake fluid warning light switch (1b).

Refitting ( Removing )

- Place the brake fluid minimum level warning light switch in its housing and engage the retaining clip.

- Place the clutch-brake fluid reservoir back in its housing and tighten the fastenings.

- Connect the electrical connection from the brake fluid minimum warning light switch.

   Op. 1048A10 AIR FILTER ASSEMBLY - R.R.