145 - MiTo   1.4 16v TJet   SEALS FOR GEAR INPUT SHAFT - REPLACE WITH GEARBOX REMOVED   2110C20   

Detail     Detail
Removing ( Refitting )

This procedure is valid only for the 120 HP version

   Op. 1820B38 CLUTCH HYDRAULIC ACTUATOR - R.R. AND BLEED AIR WITH GEARBOX REMOVED

Refitting ( Removing )

   Op. 1820B38 CLUTCH HYDRAULIC ACTUATOR - R.R. AND BLEED AIR WITH GEARBOX REMOVED

Removing ( Refitting )

This procedure is valid only for the 155 HP version

    Op. 1820B38 CLUTCH HYDRAULIC ACTUATOR - R.R. AND BLEED AIR WITH GEARBOX REMOVED


Enlarge the image

1. Remove the gearbox input shaft seal ring.

Take care not to damage the seal ring seat during its removal.

Enlarge the image


 Refitting ( Removing )

1. Fit a new gearbox input shaft seal ring (1a) using the tool (1b).

 

Tool

 

Name

 

Function

 

Validity

 

2000004800

 

Fitting tool

 

Fitting main shaft sealing ring

 

1.4 16v TJet 155 HP

1.6 JTD 16v

1.3 MultiJet 90 HP

    Op. 1820B38 CLUTCH HYDRAULIC ACTUATOR - R.R. AND BLEED AIR WITH GEARBOX REMOVED