Removing
(
Refitting
)
|
|
Removing
(
Refitting
)
|
|
|
Op. 3340B52 RIGID PIPE (ONE) FROM MASTER CYLINDER (PUMP) TO A.B.S HYDRAULIC CONTROL UNIT - R.R. |
|
  |
1. Adjust the clips (1a) to release the brake-clutch fluid reservoir (1b) from the master cylinder. |
  |
1. Undo the nuts (1a) and remove the master cylinder (1b). |
  |
1. Remove O-ring seal (1a) and the gaskets (1b). |
  |
Refitting
(
Removing
)
1. Place the master cylinder (1a) in its housing complete with new O-ring seal and new gaskets and tighten the nuts (1b) to the recommended torque.
|
|
|
- Place the brake-clutch fluid reservoir back in its housing attaching the retaining clips to the pins for the master cylinder. |
|
|
Op. 3340B52 RIGID PIPE (ONE) FROM MASTER CYLINDER (PUMP) TO A.B.S HYDRAULIC CONTROL UNIT - R.R. |
|
|
|
|