Removing
(
Refitting
)
 | The vacuum pipe and the brake servo single-acting valve are only available from the Parts Dept. together and cannot be dismantled individually. |
|
|
Removing
(
Refitting
)
|
  |
1. Open the brake servo vacuum pipe intermediate retaining clip. 2. Disconnect the single-acting valve assembly from the brake servo. |
  |
1. Loosen the band and disconnect and remove the vacuum pipe assembly from the intake chamber. |
|
|
Refitting
(
Removing
)
- Place back in position, connect the vacuum pipe assembly to the intake chamber and tighten the band. - Connect the single-acting valve to the brake servo. - Close the brake servo vacuum pipe intermediate retaining clip. |