Contents

			Test results
1	COMPONENT CONCERNED	ELECTRICAL CONNECTIONS CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Connections on injector coils and Powertrain Control Module	Check for the loose connections on gas cylinder 3 injector.	Go to Step 2	Presence of loose electrical connections.	Restore the correct connections.
2	COMPONENT CONCERNED	WIRING CONTINUITY CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Wiring between SDU control unit and Powertrain Control Module	Check for the presence of continuity breaks on the wiring between SDU control unit and pin 44 of the Powertrain Control Module caused by oxidised or corroded terminals	Go to Step 3	Breaks in the wiring continuity.	Restore the correct continuity for the wiring.
3	COMPONENT CONCERNED	WIRING INSULATION CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Wiring between SDU control unit and Powertrain Control Module	Check the integrity of the wiring insulation between SDU control unit and pin 44 of the Powertrain Control Module (possible short circuit to battery)	Go to Step 4	Wiring insulation faulty.	Restore correct wiring insulation.
4	COMPONENT CONCERNED	INJECTOR CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Gas cylinder 3 injector	Check that the gas cylinder 3 injector is working properly	End of diagnosis	Injector not working properly	Replace the injector Op. 1057B71 INJECTOR (ONE) OF LPG INJECTION SYSTEM - R.R. WITH LPG MANIFOLD PIPE REMOVED