145 - MiTo   1.4 16v TJet   Dynamic control selector on CAN   B1067   
 

 

 

Test results
 

1

  

CHECK USING DIAGNOSTIC EQUIPMENT

  

All OK

  

Problems encountered

  

Operation
 

 

Connect the diagnosis equipment, go to "vehicle diagnosis" and display the control units connected to the CAN

  

Go to Step 3

  

Electric steering control unit not connected to CAN

  

Go to Step 2
 

2

  

DNA CONTROL UNIT POWER SUPPLY CHECK

  

All OK

  

Problems encountered

  

Operation
 

 

Check the correct power supply for electric steering control unit.

  

Go to Step 3

  

Electric steering control unit not powered correctly

  

Restore the correct power supply for electric steering control unit.
 

3

  

DYNAMIC CONTROL SELECTOR OPERATION CHECK

  

All OK

  

Problems encountered

  

Operation
 

 

Keeping the diagnosis equipment connected, enter the electric steering control unit and check the status of the dynamic control selector in the parameters environment.

  

Go to Step 4

  

Incorrect operation of dynamic control selector

  

Replace the dynamic control switch

 Op. 7040L53 VEHICLE DYNAMIC CONTROL SELECTOR - R.R.
 

4

  

DYNAMIC CONTROL SELECTOR WIRING CHECK

  

All OK

  

Problems encountered

  

Operation
 

 

Check the continuity of the wiring between the dynamic control selector and the electric steering control unit

  

End of diagnosis

  

Incorrect wiring continuity

  

Restore the correct continuity for the wiring