Contents

			Test results
1	COMPONENT CONCERNED	CONTROLLED DAMPING SUSPENSION CONTROL UNIT CONNECTION CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Wiring between controlled damping suspension control unit and Body Computer	Check that the CAN connections between the controlled damping suspension control unit and the Body Computer are not faulty. In particular, that there are no open circuit or short circuit problems See E1050 CAN CONNECTION LINES	Go to Step 2	There are faulty connections	Restore or, if necessary, replace the wiring
2	COMPONENT CONCERNED	BODY COMPUTER POWER SUPPLY CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Body Computer	Check the Body Computer power supply is correct	Go to Step 3	Power supply not correct	Restore the correct power supply.
3	COMPONENT CONCERNED	CHECK USING DIAGNOSTIC EQUIPMENT	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Body Computer	Connect the diagnosis equipment to the Body Computer control unit and check whether the error is present	Go to Step 4	The error is intermittent	Delete the error.
4	COMPONENT CONCERNED	BODY COMPUTER OPERATION CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Body Computer	Check that the Body Computer is working properly	End of diagnosis	Body Computer not working properly	Replace Body Computer Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.