Test results

Check that the CAN connections between the parking sensors control unit and the Body Computer are not faulty. In particular, that there are no open circuit or short circuit problems

 See E1050 CAN CONNECTION LINES

Go to Step 2

There are faulty connections

Restore or, if necessary, replace the wiring

Check the Body Computer power supply is correct.

Go to Step 3

Power supply not correct

Restore the correct power supply.

Replace the parking sensor control unit

 Op. 5580H10 PARKING OBSTACLE DETECTION DEVICE ELECTRONIC CONTROL UNIT - R.R.

and check it is working correctly

End of diagnosis

The fault persists.

Go to Step 4

Replace the Body Computer

 Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.

End of diagnosis