NO SIGNAL
Test results
1
ELECTRICAL CONNECTIONS CHECK
All OK
Problems encountered
Operation
Check for loose electrical connections at the relay and at the engine management control unit.
Go to Step 2
Presence of loose electrical connections.
Restore the correct connections.
2
WIRING CONTINUITY CHECK
Check for breaks in the wiring continuity
Go to Step 3
Breaks in the wiring continuity.
Restore the correct continuity for the wiring.
3
WIRING INSULATION CHECK
Check the condition of the wiring insulation
Go to Step 4
Wiring insulation faulty.
Restore correct wiring insulation.
4
RELAY OPERATION CHECK
Check that the relay is working properly.
Go to Step 5
Relay not working properly.
Replace the relay.
5
ENGINE MANAGEMENT CONTROL UNIT OPERATION CHECK
Check that the engine management control unit is working properly.
End of diagnosis
Engine management control unit faulty.
Replace the engine management control unit
Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R
SIGNAL NOT VALID