The diagnostic equipment signals the following error: "C1213 - System configuration"
|
This error appears if the ABS-ESP control unit has never received a vehicle configuration from the Body Computer |
|
Test results |
||||
|
1 |
PROXY ALIGNMENT FROM BODY COMPUTER |
All OK |
Problems encountered |
Operation |
|
Connect the diagnostic equipment, turn the ignition ON and, in active diagnosis at the Body Computer control unit, request PROXY alignment. The ABS control unit should not appear amongst the control units for the latter. |
Go to Step 2 |
The ABS control unit requires PROXY alignment |
Carry out the PROXY alignment for the ABS control unit |
|
|
2 |
CORRECT OPERATION CHECK |
All OK |
Problems encountered |
Operation |
|
Turn the key off and then back on to ensure that the control unit checks whether the PROXY alignment has been successful. Check that the fault is no longer present. |
End of diagnosis |
The fault persists. |
Replace the Body Computer |
|