Contents

The diagnostic equipment signals the following error: "C1210 - Instrument Panel (NQS)"

This error is signalled if there is an error in the B-CAN between the Body Computer and the instrument panel or if one of the warning lights (EBD, ABS, ASR or ESP) is faulty

		Test results
1	PANEL INITIAL CHECK	All OK	Problems encountered	Operation
	Turn the key ON and check that the instrument panel carries out the initial check on the warning lights	Go to Step 2	One or more of the warning lights do not come on	Replace the instrument panel Op. 5560B10 CONTROL PANEL - R+R
2	INSTRUMENT PANEL CHECKS	All OK	Problems encountered	Operation
	Carry out the fault diagnosis using the diagnostic equipment on the instrument panel (NQS) to check for the presence of DTC	Go to Step 3	Errors present	Continue following the instructions given by the diagnostic equipment.
3	ELECTRICAL CONNECTIONS CHECK	All OK	Problems encountered	Operation
	Check that the instrument panel is correctly connected to the CAN See E4010 INSTRUMENT PANEL	Go to Step 3	Electrical connections faulty	Restore the correct connections, if necessary, replace the instrument panel Op. 5560B10 CONTROL PANEL - R+R
4	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Delete the errors using the diagnostic equipment. Road test See Test 3340OA ABS SYSTEM INTERVENTION CHECK to ensure that the control unit checks whether the errors are still present. Return to the workshop and check that the fault is no longer present using the diagnostic equipment	End of diagnosis